FLOORING BUSHHAMMERING MACHINES
ABU K6000
Flooring bushhammering machines
Professional performance in texturing and surface preparation of concrete and natural stone surfaces.
With a 300 mm diameter head, it can work with 3 or 6 quick change rollers. “Quick Change Systemthe ABU K6000 generates a uniform, non-skid, rough finish that promotes adhesion of self-levelers, sealers and resins. Effortlessly removes tough coatings – epoxy, paints or glues – corrects minor irregularities in a single pass. And it performs a decorative finish of up to 7 finishes from bush-hammered to sandblasted, exposing aggregates quickly and achieving a natural look.
TECHNICAL DATA
ABU K6000
- Power2.2 kW
- Voltage: 230 V / 50 Hz (single-phase)
- Chuck speed: 450 rpm
- Weight: 95 kg
- Working width: 300 mm
- Number of rollers: 3 – 6 quick-change rollers “QUICK CHANGE“
- Possible textures: 7 finishes
-
- Bushhammered:
-
-
- Thick
- Medium
- Fino
- Extra fine
-
-
- Sandblasting
-
-
- Thick
- Medium
- Fino
-
QUICK CHANGE SYSTEM
“QUICK CHANGE
Minimize jobsite downtime with Quick Change in a matter of seconds. Each roller incorporates advanced dust sealing system , SKF bearings and certified carbide tips, subjected to rigorous quality controls, obtaining consistency in the finishes, to maintain a uniform finish in each pass, and prolong its useful life.
QUICK-CHANGE SYSTEM
“QUICK CHANGE PLUS”
Our
Quick Change Plus system incorporates:
- 4 SKF bearings
- Dust sealing
- Certified carbide tips
10 textures available:
Bushhammered
G24 – Very Coarse
G36 – Coarse
G60 – Medium
G108 – Fine
G152 – Very Fine
G200 – Extra Fine
Sandblasting
G2000 – Very Coarse
G1400 – Coarse
G800 – Medium
G400 – Fine
QUICK-CHANGE SYSTEM
“JOKER”
This option allows to approach the
maximum to the banks, minimizing
execution times.
Our JOKER system incorporates:
- 2 SKF bearings
- Dust sealing
- Certified carbide tips
5 textures available:
Bushhammered
G36 – Coarse
G60 – Medium
G108 – Fine
G200 – Extra Fine
G500 – Micro sandblasting
OTHER FEATURES
Suction Intake
Quick Tool Change
Collapsible Chassis
Security System
Leveling System Tool
Protector Adjustment
ABU K6000
MAIN USES
Anti-slip texturing on exterior surfaces
Slippery pavement, risk of falls
ABU K600 creates a non-slip and uniform rough texture that improves grip on large outdoor surfaces, such as squares, streets, ramps, floors of logistics centers, industrial buildings, factories, swimming pools, stations, crosswalks, sidewalks and sloping areas where high traffic safety is required. With our expert advice you choose the right texture and, thanks to the immediate response, you resolve any technical doubts before starting the execution of the project.
Rapid removal of resistant coatings
Epoxy, paint or resin that slows down the work
Removes epoxy, industrial paints, glues and self-levelers without the need for additional chemicals or grinding discs. Our bushhammering rollers , with the Quick Change quick-change system , allow the ABU K6000 to remove these tough coatings, and at the same time, leave the surface ready for the new application. in less than a minute quickly and easily. Reduce costs per square meter and keep your construction schedule intact.
Preparation of the base for new coatings
New layer needs reliable anchoring
It generates the optimum roughness for self-levelers, sealants, membranes or resins to adhere reliably and durably; it allows to reduce small ridges, joints or unevenness before polishing or the necessary application. By adjusting pressure and speed, the ABU K6000 leaves the recommended profile depth for self-levelers, sealants or resins. The result is long-lasting adhesion without rework, backed by our technical support and advice before, during and after purchase.
Decorative texturing
Decorative and homogeneous finishes in a single pass
Removes epoxy, industrial paints, glues and self-levelers without the need for additional chemicals or grinding discs. Our bushhammering rollers , with the Quick Change quick-change system , allow the ABU K6000 to remove these tough coatings, and at the same time, leave the surface ready for the new application. in less than a minute quickly and easily. Reduce costs per square meter and keep your construction schedule intact.
ABU 300-MK D.90mm
Ideal as a machine for working in hard-to-reach areas
Where the big ones don’t reach. Compact, precise and versatile, it ensures that every detail of the finish is realized with the same quality and homogeneity as on the surfaces.
-
- Ideal for trims, corners and small areas
- Lightweight and easy to handle, it allows you to work comfortably in any environment.
- Equipped with 3 RPCA rollers and 7 available textures, it guarantees continuity in the final result.
Expert advice
Professional attention for each project
Immediate response
Queries resolved in minutes
Express delivery
Europe
Priority shipping 24-72h throughout Europe
Support and warranty
real
Follow-up after purchase, no fine print
TEXTURES AND FINISHES
THICK BUSHHAMMERED
QUICK CHANGE G36
JOKER G36
MEDIUM BUSHHAMMERED
QUICK CHANGE G60
JOKER G60
FINE BUSHHAMMERING
JOKER G108
QUICK CHANGE G108
VERY FINE BUSHHAMMERED
QUICK CHANGE G152
EXTRA FINE BUSHHAMMERED
QUICK CHANGE G200
EXTRA COARSE SANDBLASTING
QUICK CHANGE 2000
COARSE SAND
QUICK CHANGE G1400
MEDIUM SANDING
QUICK CHANGE G800
MICROSANDING
QUICK CHANGE G500
JOKER G500
Our goal is to accompany and support you to reach new goals.
MORE PERFORMANCE
Less interruptions and maintenance, allowing you to focus on your work and increase your productivity.
PRECISE ADVICE
Complete more projects in less time, whether in stone or concrete, increasing your profits and operational efficiency.
HIGH-END TOOLS
Designed to maximize your productivity, reduce downtime and ensure flawless finishes in stone and concrete.
